Product Description
Steel Conveyor Hollow Pin Short Pitch Transmission Motocycles Bush Heavy Duty Cranked Link Sleeve Offset Drive Flat Top Pintle Drag Table Top Car Parking chains
Application of Parking chains
Parking chains are a type of chain that is used to restrict access to parking areas. They are typically made of steel and are designed to be strong and durable. Parking chains can be used in a variety of settings, including:
- Residential parking: Parking chains can be used to restrict access to residential parking areas, such as apartment complexes and condominiums.
- Commercial parking: Parking chains can be used to restrict access to commercial parking areas, such as office buildings and retail stores.
- Event parking: Parking chains can be used to restrict access to parking areas for events, such as concerts and sporting events.
Parking chains are a simple and effective way to control access to parking areas. They are easy to install and use, and they are a cost-effective option for many businesses and organizations.
Here are some of the benefits of using parking chains:
- Increased security: Parking chains can help to deter unauthorized vehicles from entering parking areas.
- Reduced traffic congestion: Parking chains can help to reduce traffic congestion by preventing vehicles from parking in unauthorized areas.
- Improved safety: Parking chains can help to improve safety by preventing vehicles from blocking access to fire hydrants and other emergency equipment.
If you are looking for a way to control access to your parking area, parking chains are a viable option. They are easy to install and use, and they can help to improve security, reduce traffic congestion, and improve safety.
Here are some of the drawbacks of using parking chains:
- Can be unsightly: Parking chains can be unsightly, especially in high-traffic areas.
- Can be difficult to remove: Parking chains can be difficult to remove, especially if they are frozen or covered in snow.
- Can be damaged by vehicles: Parking chains can be damaged by vehicles, especially if they are not properly installed.
Overall, parking chains are a viable option for controlling access to parking areas. They are easy to install and use, and they can help to improve security, reduce traffic congestion, and improve safety. However, it is important to weigh the benefits and drawbacks of using parking chains before making a decision.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Usage: | Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain |
|---|---|
| Material: | Iron |
| Surface Treatment: | Oil Blooming |
| Feature: | Oil Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
How do hollow pin chains handle wear and tear in continuous operation?
Hollow pin chains are designed to handle wear and tear in continuous operation, but proper maintenance and certain considerations are necessary to ensure their longevity and optimal performance.
- Material Selection: Choosing the right material for the hollow pin chains is crucial. Chains made from high-quality alloy steel or stainless steel offer better resistance to wear and corrosion, making them suitable for continuous operation in various environments.
- Proper Lubrication: Regular and adequate lubrication is essential to minimize friction between the chain components. Proper lubrication reduces wear and heat generation, extending the chain's life and maintaining its performance in continuous operation.
- Chain Tension: Maintaining the correct chain tension is crucial for continuous operation. Proper tension ensures the chain remains engaged with the sprockets or pulleys, reducing wear and preventing premature elongation.
- Inspection and Maintenance: Regular inspection and maintenance are necessary to identify signs of wear, elongation, or damage. Addressing these issues promptly helps prevent further damage and ensures safe and efficient continuous operation.
- Environmental Considerations: The operating environment can significantly impact chain wear and tear. Factors such as dust, debris, moisture, and temperature can affect the chain's performance. Taking appropriate measures to protect the chain from adverse environmental conditions is important for continuous operation.
- Load Capacity: Ensuring that the hollow pin chains are appropriately sized and have the required load-carrying capacity for the application is crucial. Overloading the chains can accelerate wear and lead to premature failure.
In summary, hollow pin chains can handle wear and tear in continuous operation when proper maintenance and considerations are taken into account. Selecting the right materials, maintaining proper lubrication and tension, conducting regular inspections, and considering the operating environment are essential for ensuring the longevity and reliable performance of hollow pin chains in continuous operation.
Can hollow pin chains be used for power transmission in industrial machinery?
Yes, hollow pin chains can be used for power transmission in industrial machinery, but there are certain considerations to take into account.
1. Load and Power Requirements: Before using hollow pin chains for power transmission, it's essential to assess the load and power requirements of the machinery. Hollow pin chains are designed to handle moderate to heavy loads, making them suitable for many industrial applications. However, for high-power transmission or extremely heavy loads, it's crucial to ensure that the chosen chain's strength and capacity meet the specific needs of the machinery.
2. Speed and Efficiency: Hollow pin chains are capable of transmitting power at various speeds. However, it's important to consider the speed requirements of the machinery and select an appropriate chain that can operate efficiently at the desired speed range. Proper lubrication and maintenance are also essential to ensure smooth operation and reduce friction losses, enhancing overall power transmission efficiency.
3. Design and Durability: Industrial machinery often operates in demanding environments with exposure to dust, debris, and other harsh conditions. It's crucial to select hollow pin chains with durable materials and a robust design that can withstand these challenging conditions. Additionally, proper maintenance, including regular inspection and lubrication, is necessary to extend the chain's lifespan and ensure reliable power transmission.
4. Alignment and Tensioning: Proper chain alignment and tensioning are critical for effective power transmission and to prevent premature wear or failure. Misalignment can lead to increased friction and wear, negatively affecting the chain's performance. Regular checks and adjustments are essential to maintain the optimal alignment and tension of the chain.
5. Attachment Options: Hollow pin chains can be equipped with various attachments, such as extended pins or custom links, to accommodate specific power transmission requirements in industrial machinery. The ability to customize the chain with appropriate attachments enhances its versatility and adaptability for different applications.
In conclusion, hollow pin chains can be used for power transmission in industrial machinery, but careful consideration of load, speed, design, alignment, and attachment options is necessary to ensure efficient and reliable operation. Regular maintenance and proper chain selection are crucial to maximize the chain's performance and longevity in power transmission applications.
What are the advantages of using a hollow pin chain in specific applications?
A hollow pin chain offers several advantages in specific applications, making it a preferred choice for certain industrial processes. Some of the key advantages include:
- Customization: The hollow pin chain's unique design allows for easy attachment installation anywhere along the chain's length. This customization feature is particularly beneficial in applications where materials need to be positioned or handled differently at various points in the process.
- Quick Assembly: The hollow pin chain enables rapid assembly and disassembly of attachments without the need to break the chain. This quick assembly and reconfiguration save valuable time during maintenance and setup, reducing downtime and increasing overall productivity.
- Flexibility: Due to its customizable nature, the hollow pin chain offers high flexibility in accommodating different conveyor layouts and handling various product types and sizes. This flexibility is crucial in industries that deal with diverse product lines or frequently changing production needs.
- Reduced Maintenance Costs: The ease of adding or removing attachments simplifies maintenance tasks and reduces the need for specialized tools or extensive disassembly. As a result, maintenance costs are minimized, leading to more cost-effective operations.
- Wide Range of Applications: Hollow pin chains find applications in industries such as food processing, packaging, material handling, and manufacturing, where customization, flexibility, and quick assembly are essential for efficient production processes.
- Enhanced Versatility: The ability to integrate various attachments and accessories onto the chain allows for the creation of complex conveyor systems or handling equipment. This versatility supports unique industrial processes and specialized applications.
- Improved Product Handling: In applications requiring delicate product handling or precise positioning, the hollow pin chain's customization capabilities ensure gentle and accurate product movement, reducing the risk of product damage or misplacement.
In summary, the hollow pin chain offers significant advantages in specific applications where customization, flexibility, quick assembly, and reduced maintenance costs are essential. Its unique design and functionality make it a valuable component in industries that require adaptable and efficient material handling and conveying systems.
editor by CX 2024-04-12
China Custom Stainless Steel Hollow Pin Conveyor Roller Chains Transmission Chain
Product Description
Product Description
Product Parameters
| Standard | GB, ISO, ANSI, DIN |
| Type | Standard A and standard B precision roller chain, conveyor chain; |
| special chain with accessories, welding chain, leaf chain and sprocket | |
| ANSI chain No. | 40,50,60,80,100,120,140,160,180,200,240; |
| C40,C50,C60,C80,C100,C120,C140,C160; | |
| DIN/ISO chain No. | 08A,10A,12A,16A,20A,24A,28A,32A,36A,40A,48A; |
| C08A,C10A,C12A,C16A,C20A,C24A,C28A,C32A; | |
| Application | Food processing, pharmaceutical and chemical industries, electronics, machinery; |
| household appliances, automotive manufacturing, metallurgy, sewage treatment | |
| Series | A series,B series |
More Products
Advantage
Certifications
DETAILS ABOUT CHINAMFG CHAIN
Exhibition
Workshop
Application
Packaging Details
Shipping
Contact Information
FAQ
1. Are you manufacturer or trade Company?
We are a factory founded in 1997 with trade team for international service.
2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, Western Union, L/C at sight
3. What is your lead time for your goods?
Normally 35 days after confirmed order. 30 days could be available in low season for some items (during May to July), and 45 days during new year and hot season ( Jan to March).
4. Samples
For customers who need sample confirmation before ordering, please bear in mind that the following policy will be adopted:
1) All samples are free of charge with the maximum value not exceeding USD 100.
2) The courier cost for the first-time sample sending will be charged for by the consignee. We will send the samples with freight to be collected. So please inform your account with FedEx, UPS, DHL or TNT so that we can proceed promptly.
3) The first-time courier cost will be totally deducted from the contract value of the trial cooperation.
4) OEM/ODM are both available.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard or Nonstandard: | Nonstandard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Car |
| Surface Treatment: | Polishing |
| Structure: | Roller Chain |
| Material: | Stainless Steel |
| Type: | Double Pitch Chain |
| Samples: |
US$ 1/Meter
1 Meter(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can hollow pin chains be used in automated assembly and robotic systems?
Yes, hollow pin chains can be used in automated assembly and robotic systems, and they offer several advantages for these applications.
- Precision and Accuracy: Automated assembly and robotic systems require precise and accurate movements to ensure components are positioned correctly. Hollow pin chains, with reduced backlash and tight tolerances, can provide the level of precision needed for these systems.
- Reduced Weight: Hollow pin chains are lighter compared to solid pin chains, which reduces the overall weight and inertia in robotic arms and moving parts. This feature allows for faster and more efficient robotic movements, improving the system's speed and performance.
- Flexible Configuration: Hollow pin chains can be customized with various attachments, such as grippers, end-effectors, and tooling, to suit different assembly tasks and accommodate a wide range of components.
- Smooth and Quiet Operation: The reduced friction and noise of hollow pin chains contribute to quieter and smoother machine operation, which is beneficial in environments where low noise levels are desired.
- Corrosion Resistance: In some automated assembly and robotic systems, exposure to various materials or substances may occur. Hollow pin chains made from stainless steel or other corrosion-resistant materials can withstand exposure to these substances and ensure reliable performance over time.
- Easy Maintenance: Hollow pin chains are designed with accessible pins and links, making them easier to inspect, clean, and maintain. Regular maintenance tasks, such as lubrication and tension adjustment, can be performed efficiently, reducing downtime and optimizing the system's uptime.
However, there are specific considerations to keep in mind when using hollow pin chains in automated assembly and robotic systems:
- Load Capacity: Ensure that the chosen hollow pin chain has the appropriate load-carrying capacity for the robotic system's specific requirements. Proper chain selection and sizing are crucial to ensure the chain can handle the intended loads and cycles.
- Integration with Robotics: Properly integrate the hollow pin chain with the robotic system, ensuring that it works seamlessly with other components and interfaces smoothly with the robotic control software.
- System Design and Engineering: The overall system design and engineering play a significant role in how the hollow pin chain performs in the automated assembly and robotic systems. Proper design and implementation ensure optimal efficiency and safety.
In conclusion, hollow pin chains are a suitable choice for automated assembly and robotic systems, offering precision, reduced weight, flexible configuration, smooth operation, corrosion resistance, and easy maintenance. Proper chain selection, integration, and system design are essential to ensure the chain's reliable performance and contribute to the success of the automated assembly and robotic processes.
Can hollow pin chains be used in automotive manufacturing and assembly lines?
Yes, hollow pin chains can be used in automotive manufacturing and assembly lines, and they offer several advantages for these applications.
- Precision and Accuracy: Automotive manufacturing and assembly lines often require precise and accurate movements to ensure proper alignment and fitment of components. Hollow pin chains, with their precise manufacturing and reduced backlash, can provide the level of precision needed for these processes.
- Flexibility: Hollow pin chains are designed to be flexible, making them well-suited for navigating around tight spaces and complex assembly line layouts. Their ability to negotiate bends and sprockets smoothly allows for efficient material handling and component transfer.
- Attachment Options: Hollow pin chains can be equipped with various attachments to accommodate specific automotive assembly requirements. These attachments can assist in material handling, part transfer, and positioning, enhancing the efficiency of the assembly line.
- Reduced Weight: The hollow pin design reduces the weight of the chains, resulting in lower inertia during starts and stops. This feature allows for smoother and more efficient operation in automotive assembly lines.
- Corrosion Resistance: Automotive manufacturing environments may involve exposure to oils, lubricants, and other substances. Hollow pin chains made from stainless steel or other corrosion-resistant materials can withstand such conditions and offer extended service life.
- Easy Maintenance: Hollow pin chains are relatively easy to maintain, with accessible pins and links. Regular lubrication and inspection can help extend the chain's life and ensure continuous operation in the assembly line.
Overall, hollow pin chains are a reliable choice for automotive manufacturing and assembly lines due to their precision, flexibility, attachment options, reduced weight, corrosion resistance, and ease of maintenance. When properly selected and maintained, hollow pin chains can contribute to the smooth and efficient operation of automotive production processes.
What materials are hollow pin chains typically made of?
Hollow pin chains are commonly manufactured using high-quality materials that offer excellent strength, durability, and resistance to wear. The most frequently used materials for hollow pin chains include:
- Carbon Steel: Carbon steel is a popular choice for hollow pin chains due to its affordability and good mechanical properties. It provides adequate strength and hardness for many industrial applications while being relatively cost-effective.
- Stainless Steel: Stainless steel hollow pin chains are known for their exceptional corrosion resistance, making them suitable for applications exposed to moisture, chemicals, or harsh environments. They are often used in food processing, pharmaceuticals, and outdoor applications.
- Alloy Steel: Alloy steel hollow pin chains are alloyed with other elements to enhance specific properties, such as increased strength, toughness, or wear resistance. These chains are commonly used in heavy-duty applications where higher performance is required.
- Plastic: In some cases, hollow pin chains can be made from engineering plastics, such as acetal or polyethylene. Plastic chains offer benefits like low friction, lightweight, and resistance to corrosion and chemicals. They are often used in applications where traditional metal chains may not be suitable.
The choice of material depends on the specific requirements of the application. Factors such as load capacity, environmental conditions, operating temperature, and budget considerations play a role in determining the most suitable material for a particular hollow pin chain application.
editor by CX 2024-03-29
China OEM Steel Conveyor Hollow Pin Short Pitch Transmission Motocycles Bush Heavy Duty Cranked Link Sleeve Offset Drive Flat Top Pintle Drag Table Top Car Parking Chains
Product Description
Steel Conveyor Hollow Pin Short Pitch Transmission Motocycles Bush Heavy Duty Cranked Link Sleeve Offset Drive Flat Top Pintle Drag Table Top Car Parking chains
Application of Parking chains
Parking chains are a type of chain that is used to restrict access to parking areas. They are typically made of steel and are designed to be strong and durable. Parking chains can be used in a variety of settings, including:
- Residential parking: Parking chains can be used to restrict access to residential parking areas, such as apartment complexes and condominiums.
- Commercial parking: Parking chains can be used to restrict access to commercial parking areas, such as office buildings and retail stores.
- Event parking: Parking chains can be used to restrict access to parking areas for events, such as concerts and sporting events.
Parking chains are a simple and effective way to control access to parking areas. They are easy to install and use, and they are a cost-effective option for many businesses and organizations.
Here are some of the benefits of using parking chains:
- Increased security: Parking chains can help to deter unauthorized vehicles from entering parking areas.
- Reduced traffic congestion: Parking chains can help to reduce traffic congestion by preventing vehicles from parking in unauthorized areas.
- Improved safety: Parking chains can help to improve safety by preventing vehicles from blocking access to fire hydrants and other emergency equipment.
If you are looking for a way to control access to your parking area, parking chains are a viable option. They are easy to install and use, and they can help to improve security, reduce traffic congestion, and improve safety.
Here are some of the drawbacks of using parking chains:
- Can be unsightly: Parking chains can be unsightly, especially in high-traffic areas.
- Can be difficult to remove: Parking chains can be difficult to remove, especially if they are frozen or covered in snow.
- Can be damaged by vehicles: Parking chains can be damaged by vehicles, especially if they are not properly installed.
Overall, parking chains are a viable option for controlling access to parking areas. They are easy to install and use, and they can help to improve security, reduce traffic congestion, and improve safety. However, it is important to weigh the benefits and drawbacks of using parking chains before making a decision.
| Usage: | Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain |
|---|---|
| Material: | Iron |
| Surface Treatment: | Oil Blooming |
| Feature: | Oil Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
How do hollow pin chains handle high-speed indexing and positioning requirements?
Hollow pin chains are well-suited for high-speed indexing and positioning requirements due to their design and certain features that enhance their performance in such applications.
- Precision and Accuracy: Hollow pin chains are manufactured with tight tolerances and reduced backlash, ensuring precise and accurate movement during indexing and positioning tasks. This feature allows them to achieve the required positioning accuracy at high speeds.
- Reduced Weight: The hollow pin design results in lighter chains, reducing the overall weight and inertia in the system. This feature enables faster acceleration and deceleration, contributing to quicker indexing and positioning cycles.
- Smooth Operation: Hollow pin chains are designed with smooth-running components, resulting in minimal vibration and noise during operation. This characteristic is essential for maintaining stability and precision during high-speed movements.
- Flexibility: Hollow pin chains can be customized with various attachments, such as cams or profiled links, to achieve specific indexing and positioning profiles. This flexibility allows for the creation of complex motion profiles tailored to the application's needs.
- Material Selection: Choosing the right material, such as stainless steel or other high-strength alloys, ensures the chain's durability and performance at high speeds, reducing the risk of premature wear or failure.
- Lubrication: Proper and regular lubrication is crucial to reduce friction and heat generation during high-speed operation. Adequate lubrication minimizes wear and prolongs the chain's service life.
When using hollow pin chains for high-speed indexing and positioning, certain considerations should be taken into account:
- Dynamic Loads: High-speed indexing and positioning can subject the chain to dynamic loads. Ensuring that the chain's load-carrying capacity and strength are adequate for the application is crucial to avoid premature wear or failure.
- System Design and Engineering: The entire system's design and engineering play a vital role in achieving high-speed performance. Properly integrating the chain into the system, optimizing the drive mechanisms, and minimizing inertia are critical for smooth and efficient operation.
- Temperature Management: High-speed operation can generate heat in the chain and surrounding components. Ensuring proper cooling and temperature management can help maintain the chain's performance and prevent overheating.
In conclusion, hollow pin chains are capable of handling high-speed indexing and positioning requirements due to their precision, reduced weight, smooth operation, flexibility, and material selection. Proper chain selection, lubrication, system design, and engineering are essential for achieving reliable and efficient high-speed performance in various industries and applications.
Can hollow pin chains be used in material handling and conveyor systems?
Yes, hollow pin chains are commonly used in material handling and conveyor systems due to their unique features and benefits. Here's why they are suitable for these applications:
- Flexibility: Hollow pin chains offer greater flexibility compared to solid pin chains. This flexibility allows them to navigate around bends and sprockets smoothly, making them ideal for conveyor systems with curved paths.
- Attachment Options: Hollow pin chains can be equipped with various attachments, such as cleats, extended pins, or custom links, to suit specific material handling needs. These attachments enhance the chain's capability to handle and convey different types of materials efficiently.
- Strength and Load Capacity: Material handling and conveyor systems often involve transporting heavy loads. Hollow pin chains are designed to handle moderate to heavy loads, making them reliable for these applications.
- Reduced Weight: The hollow pin design of these chains reduces their overall weight compared to solid pin chains, resulting in lower inertia during starts and stops. This feature allows for smoother and more efficient operation in material handling systems.
- Corrosion Resistance: Many material handling and conveyor systems are used in diverse environments, some of which may be corrosive. Hollow pin chains made from materials like stainless steel offer excellent corrosion resistance, ensuring long-lasting performance and reduced maintenance requirements.
- Easy Maintenance: Hollow pin chains are relatively easy to maintain, thanks to their simple design and accessibility. Regular lubrication and inspection can help extend the chain's life and ensure trouble-free operation.
Overall, hollow pin chains are a versatile choice for material handling and conveyor systems. Their flexibility, attachment options, strength, reduced weight, corrosion resistance, and ease of maintenance make them well-suited for a wide range of applications in various industries.
Can hollow pin chains be used in high-temperature environments?
Yes, hollow pin chains can be used in high-temperature environments, but their suitability depends on the material they are made of and the specific temperature conditions. When selecting a hollow pin chain for high-temperature applications, it's crucial to consider the following:
- Material: Choose a hollow pin chain made from heat-resistant materials such as stainless steel or other alloys that can withstand elevated temperatures without losing their strength or integrity.
- Operating Temperature Range: Check the manufacturer's specifications to ensure the hollow pin chain's operating temperature range aligns with the temperatures in your application.
- Lubrication: Proper lubrication is essential for high-temperature applications to reduce friction and wear. Consider using high-temperature lubricants that can withstand the heat and provide adequate protection to the chain.
- Environmental Conditions: Evaluate the overall environmental conditions in which the chain will operate, as factors like dust, debris, and other contaminants can impact its performance.
- Thermal Expansion: Be aware of the potential for thermal expansion in high-temperature environments, which may affect the chain's tension and alignment. Proper installation and tensioning are crucial to address these issues.
- Regular Maintenance: Implement a regular maintenance schedule to inspect and replace the hollow pin chain as needed, especially in demanding high-temperature applications where wear and fatigue are more likely to occur.
By considering these factors and selecting a hollow pin chain designed for high-temperature use, you can ensure the chain's reliable performance and longevity even in challenging and hot operating conditions.
editor by CX 2023-09-13
China OEM Steel Conveyor Hollow Pin Short Pitch Transmission Motocycles Bush Heavy Duty Cranked Link Sleeve Offset Drive Flat Top Pintle Drag Table Top Car Parking Chains
Product Description
Steel Conveyor Hollow Pin Short Pitch Transmission Motocycles Bush Heavy Duty Cranked Link Sleeve Offset Drive Flat Top Pintle Drag Table Top Car Parking chains
Application of Parking chains
Parking chains are a type of chain that is used to restrict access to parking areas. They are typically made of steel and are designed to be strong and durable. Parking chains can be used in a variety of settings, including:
- Residential parking: Parking chains can be used to restrict access to residential parking areas, such as apartment complexes and condominiums.
- Commercial parking: Parking chains can be used to restrict access to commercial parking areas, such as office buildings and retail stores.
- Event parking: Parking chains can be used to restrict access to parking areas for events, such as concerts and sporting events.
Parking chains are a simple and effective way to control access to parking areas. They are easy to install and use, and they are a cost-effective option for many businesses and organizations.
Here are some of the benefits of using parking chains:
- Increased security: Parking chains can help to deter unauthorized vehicles from entering parking areas.
- Reduced traffic congestion: Parking chains can help to reduce traffic congestion by preventing vehicles from parking in unauthorized areas.
- Improved safety: Parking chains can help to improve safety by preventing vehicles from blocking access to fire hydrants and other emergency equipment.
If you are looking for a way to control access to your parking area, parking chains are a viable option. They are easy to install and use, and they can help to improve security, reduce traffic congestion, and improve safety.
Here are some of the drawbacks of using parking chains:
- Can be unsightly: Parking chains can be unsightly, especially in high-traffic areas.
- Can be difficult to remove: Parking chains can be difficult to remove, especially if they are frozen or covered in snow.
- Can be damaged by vehicles: Parking chains can be damaged by vehicles, especially if they are not properly installed.
Overall, parking chains are a viable option for controlling access to parking areas. They are easy to install and use, and they can help to improve security, reduce traffic congestion, and improve safety. However, it is important to weigh the benefits and drawbacks of using parking chains before making a decision.
| Usage: | Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain |
|---|---|
| Material: | Iron |
| Surface Treatment: | Oil Blooming |
| Feature: | Oil Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Can hollow pin chains be used in marine or underwater applications?
Yes, hollow pin chains can be used in marine or underwater applications, and they can offer several benefits for such uses.
- Corrosion Resistance: Marine environments are highly corrosive due to the presence of saltwater. Hollow pin chains made from stainless steel or other corrosion-resistant materials are well-suited for these conditions, as they can withstand the corrosive effects of seawater and ensure prolonged service life.
- Reduced Weight: The hollow pin design results in lighter chains, which can be advantageous in marine or underwater applications where reducing weight is desirable to minimize the load on equipment and improve overall efficiency.
- Attachment Options: Hollow pin chains can be equipped with various attachments, making them versatile for different marine applications, such as securing cargo, operating shipboard equipment, or marine propulsion systems.
- Resistance to Marine Organisms: Stainless steel hollow pin chains are less prone to fouling and buildup of marine organisms, such as algae and barnacles, compared to some other materials. This characteristic reduces maintenance requirements and helps maintain the chain's performance in marine environments.
- Sealing and Protection: In underwater applications, some hollow pin chains can be equipped with additional seals or coatings to provide further protection against water ingress and enhance the chain's durability.
However, there are specific considerations to keep in mind when using hollow pin chains in marine or underwater applications:
- Regular Inspection and Maintenance: Despite their corrosion resistance, regular inspection and maintenance are necessary to monitor the chain's condition and address any issues promptly.
- Depth and Pressure: For deep-sea applications, the chain must be designed to withstand the increased water pressure at greater depths.
- Lubrication: Proper lubrication is crucial for smooth operation and to reduce friction in underwater conditions.
- Material Selection: Choosing the right material, such as stainless steel or other suitable alloys, is essential to ensure the chain's performance and longevity in marine environments.
In conclusion, hollow pin chains made from corrosion-resistant materials, such as stainless steel, are suitable for marine and underwater applications. Their corrosion resistance, reduced weight, attachment options, and resistance to marine organisms make them valuable for various marine-related uses, provided proper maintenance and material selection considerations are taken into account.
Can hollow pin chains be used in high-torque and heavy-duty lifting applications?
Yes, hollow pin chains can be used in high-torque and heavy-duty lifting applications, but certain factors need to be considered to ensure their suitability and safe operation.
- Chain Strength: In high-torque and heavy-duty lifting applications, the chain is subjected to significant tension and load. It's essential to choose hollow pin chains with high tensile strength and load-carrying capacity to handle the heavy loads encountered in lifting operations.
- Material Selection: The choice of material for the hollow pin chain is critical in heavy-duty lifting applications. Chains made from alloy steel or other high-strength materials are preferred to ensure durability and resistance to wear and fatigue.
- Attachment Options: Hollow pin chains can be equipped with various attachments, such as hooks or shackles, to facilitate lifting and secure the load properly. Choosing the appropriate attachments is essential for safe and efficient lifting operations.
- Regular Inspection and Maintenance: High-torque and heavy-duty lifting applications put significant stress on the chain and its components. Regular inspection and maintenance are necessary to identify and address any signs of wear, elongation, or damage promptly.
- Proper Lubrication: Adequate lubrication is essential to minimize friction and wear in high-torque and heavy-duty lifting applications. Lubricating the chain regularly helps to extend its lifespan and ensure smooth operation during lifting.
While hollow pin chains can be used in high-torque and heavy-duty lifting applications, it's important to work with experienced engineers and follow industry standards and safety guidelines. Proper chain selection, installation, and maintenance are crucial to ensure safe and reliable lifting operations.
Can hollow pin chains be used in overhead or inverted applications?
Yes, hollow pin chains can be used in both overhead and inverted applications, providing certain design considerations are taken into account. These chains are versatile and can accommodate various configurations, including vertical lifting and inverted movements. Here's how hollow pin chains handle such applications:
- Overhead Applications: Hollow pin chains can be used in overhead applications where the chain is required to lift or move loads vertically. They are commonly employed in material handling systems, conveyor systems, and other lifting equipment.
- Inverted Applications: Hollow pin chains can also be used in inverted applications where the chain needs to be installed upside down, such as in some conveyor systems or certain types of machinery.
- Design Considerations: When using hollow pin chains in overhead or inverted applications, it is essential to ensure that the chain's load capacity and strength are adequate for the specific requirements of the task. The chain's tensile strength, pitch, and overall design must be suitable for the intended application.
- Lubrication: Proper lubrication is crucial, especially in overhead or inverted applications, as it helps reduce friction and wear. Lubricating the chain regularly can extend its lifespan and ensure smoother operation.
- Maintenance: Regular maintenance and inspections are necessary to identify any signs of wear, misalignment, or damage. Addressing these issues promptly can prevent unexpected chain failures and ensure safe operation.
Overall, hollow pin chains are a reliable choice for both overhead and inverted applications, provided that the chain is selected, installed, and maintained correctly. Consulting with the chain manufacturer or a qualified engineer can help determine the most suitable chain type and specifications for a specific overhead or inverted application.
editor by CX 2023-09-12
China OEM Stainless Steel Hollow Pin Transmission Driving Roller Chain Mc Series Conveyor Chains
Product Description
Product Description
Product Parameters
| Standard | GB, ISO, ANSI, DIN |
| Type | Standard A and standard B precision roller chain, conveyor chain; |
| special chain with accessories, welding chain, leaf chain and sprocket | |
| ANSI chain No. | 40,50,60,80,100,120,140,160,180,200,240; |
| C40,C50,C60,C80,C100,C120,C140,C160; | |
| DIN/ISO chain No. | 08A,10A,12A,16A,20A,24A,28A,32A,36A,40A,48A; |
| C08A,C10A,C12A,C16A,C20A,C24A,C28A,C32A; | |
| Application | Food processing, pharmaceutical and chemical industries, electronics, machinery; |
| household appliances, automotive manufacturing, metallurgy, sewage treatment | |
| Series | A series,B series |
More Products
Advantage
Certifications
DETAILS ABOUT CZPT CHAIN
Exhibition
Workshop
Application
Packaging Details
Shipping
FAQ
1. Are you manufacturer or trade Company?
We are a factory founded in 1997 with trade team for international service.
2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, Western Union, L/C at sight
3. What is your lead time for your goods?
Normally 35 days after confirmed order. 30 days could be available in low season for some items (during May to July), and 45 days during new year and hot season ( Jan to March).
4. Samples
For customers who need sample confirmation before ordering, please bear in mind that the following policy will be adopted:
1) All samples are free of charge with the maximum value not exceeding USD 100.
2) The courier cost for the first-time sample sending will be charged for by the consignee. We will send the samples with freight to be collected. So please inform your account with FedEx, UPS, DHL or TNT so that we can proceed promptly.
3) The first-time courier cost will be totally deducted from the contract value of the trial cooperation.
| Usage: | Transmission Chain, Drag Chain, Conveyor Chain |
|---|---|
| Material: | Stainless steel |
| Surface Treatment: | Polishing |
| Feature: | Heat Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the environmental considerations when using hollow pin chains?
When using hollow pin chains, several environmental considerations should be taken into account to ensure their performance and longevity in various applications.
- Moisture and Corrosion: In environments with high humidity or direct exposure to water, such as outdoor applications or food processing facilities with washdown procedures, the chains may be susceptible to corrosion. Choosing stainless steel or other corrosion-resistant materials for the chains can mitigate the impact of moisture and prolong their lifespan.
- Dust and Debris: Dust and debris can accumulate on the chain, affecting its operation and accelerating wear. In dusty or dirty environments, regular cleaning and maintenance are necessary to prevent particle buildup and ensure smooth operation.
- Chemical Exposure: Some industries involve exposure to chemicals that can potentially damage the chain. Acidic or alkaline substances, lubricants, and cleaning agents may impact the chain's materials over time. Choosing a chain with suitable chemical resistance or implementing protective measures can mitigate these effects.
- Temperature Extremes: Extreme temperatures can affect chain performance. High temperatures may cause lubricants to break down faster, while low temperatures can make the chain more rigid and prone to failure. Selecting appropriate lubricants and chain materials that can withstand the operating temperatures is crucial.
- Outdoor Exposure: Chains used in outdoor applications are exposed to weather elements, including rain, snow, and sunlight. Proper protection, such as covering the chain or applying weather-resistant coatings, can help preserve their performance and prevent premature deterioration.
- Sanitary Requirements: In industries like food processing or pharmaceuticals, maintaining sanitary conditions is essential. Using chains with smooth surfaces, easy-to-clean materials, and adhering to proper hygiene protocols are vital to meet sanitary standards.
Addressing these environmental considerations can help extend the life of hollow pin chains, reduce maintenance requirements, and ensure reliable performance in various applications.
What are the noise and vibration characteristics of hollow pin chains?
Hollow pin chains exhibit specific noise and vibration characteristics that can vary based on factors such as design, material, lubrication, and operating conditions.
- Noise Characteristics:
- Noise Level: Hollow pin chains generally produce less noise compared to some other types of chains, such as roller chains. The design of the hollow pins allows for smoother movement and reduced friction, resulting in quieter operation.
- Impact Noise: Hollow pin chains can generate impact noise when engaging sprockets or other components due to the design of the pins. This impact noise can be minimized by using proper lubrication and maintaining the chain at the recommended tension levels.
- Maintenance Impact: Noise from hollow pin chains can increase if the chain is not adequately lubricated or if it experiences wear and elongation. Regular maintenance, including lubrication and tension adjustments, is essential to reduce noise levels and prolong chain life.
- Vibration Characteristics:
- Vibration Damping: Hollow pin chains typically offer better vibration damping properties compared to solid pin chains. The hollow design of the pins allows for some degree of flexibility, which can help reduce vibrations in certain applications.
- High-Speed Vibration: At high speeds, hollow pin chains may experience more vibration compared to lower speeds. Adequate lubrication and precision manufacturing are critical to minimize vibration and ensure smooth operation at high speeds.
- Impact-Related Vibration: Like impact noise, hollow pin chains can produce vibrations during engagement with sprockets or other components. Proper lubrication and chain tension are essential to minimize impact-related vibrations.
Overall, the noise and vibration characteristics of hollow pin chains are generally favorable, especially when properly maintained and used within their design limits. The choice of lubrication, tension control, and material selection can significantly impact the noise and vibration levels experienced during the operation of hollow pin chains.
How does a hollow pin chain differ from other types of chains?
A hollow pin chain differentiates from other types of chains primarily due to its unique design and functionality. Here are the key differences that set it apart:
- Hollow Pins: The most distinctive feature of a hollow pin chain is its hollow pins. These pins have a hollow center, allowing for easy insertion of cross-rods or attachments anywhere along the chain's length. This design feature enables quick and flexible customization of the chain for specific applications.
- Attachment Points: Conventional roller chains usually have solid pins, making it challenging to add attachments at different points on the chain. In contrast, the hollow pin chain's design permits attachments to be easily connected, removed, or repositioned without disassembling the chain, reducing downtime and simplifying maintenance.
- Customizability: Due to the presence of hollow pins, the hollow pin chain is highly customizable. It allows for a wide range of attachments, making it suitable for various industrial applications that require unique handling, conveying, or positioning of materials.
- Applications: While other types of chains serve specific purposes, the hollow pin chain finds extensive use in industries where flexibility and adaptability are essential. It is commonly employed in conveyor systems, food processing, packaging, and other manufacturing processes that benefit from customizable chain configurations.
- Complexity: The hollow pin chain's design may be slightly more complex than standard roller chains due to the presence of hollow pins. However, this added complexity translates to increased versatility and functionality in specific applications.
In summary, the hollow pin chain stands out from other chains due to its hollow pins, allowing for easy attachment installation and customization. This feature makes it well-suited for various industries that require adaptable and customizable chain solutions. Its unique design provides operational benefits and reduces downtime, making it a preferred choice in applications where other types of chains may not offer the same level of flexibility and customization.
editor by CX 2023-08-30
China Good quality marine hardware motorcycle parts Conveyor Chain Roller Chains /Hollow Chains/stainless steel Pintle Chain (M Series) steel bush chain
Product Description
Conveyor Chains (M Series)
Chain No.: M20, M28, M40, M56, M80, M112, M160, M224, M315, M450
Pitch: 40.0mm to 200.0 mm
For Free Samples
Prompt Delivery
Green Product
International Approvals
Experienced Staff
Why choose us?
1. HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd established in 1991, we have 5 subsidiaries in China and also have 6 subsidiaries abroad;
2. We covering a production area of 200, 100 square meters, have more than 1, 800 sets of advanced equipment and over 3, 100 highly skilled employees, the annual production capacity has exceeded 20, 000, 000 meters;
3. We specialized in producing all kinds of standard chains and special chains, such as A or B series chains, driving chains, conveyor chains, dragging chains, agricultural chains and so on;
4. We have obtained ISO9001, ISO14001, ISO16969, AAA and API certificates.
The company is specialized in producing all kinds of standard chains and special chains, E. G. A or B series chains, automobile chains, stainless steel chains, combine harvester chains, heavy-duty cranked link transmission chains, stereo garage chains and maintenance-free chains etc.
In recent years, it invests the capital and depends on the improvement of technology to accelerate the step of new product development and the step of technology reform. It intends to produce high strength and precision chains in order to meet requirements of the domestic and overseas markets. We have enclosed our catalog, which introduces our company in detail and covers the main products we supply at present. You may also visit our online company introduction which includes our latest product line.
Should any of these items be of interest to you, please let us know. We will be happy to give you a quotation CZPT receipt of your detailed requirements.
We look CZPT to receiving your enquires soon.
| Usage: | Transmission Chain |
|---|---|
| Material: | Stainless steel |
| Surface Treatment: | Polishing |
| Feature: | Heat Resistant |
| Chain Size: | 1/2"*11/128" |
| Structure: | Roller Chain |
| Customization: |
Available
| Customized Request |
|---|
What to look for in a roller chain
There are many different factors to consider when purchasing a roller chain. One of the most important factors is tensile strength, which represents the force required to break the chain. Roller chains are available in three different tensile strengths: minimum, average and ultimate. Each strength reflects a different limit to the load the chain can handle. However, these limits are not always equal and you should be aware of the differences between roller chains.
Canonical chain
Most roller chains have standard sizes printed on the side panels. This is usually "40" or "C2080H", but can also be the letter "B". If the chain is old, it will need to be cleaned to see its size. You can find the size on the standard roller chain size chart, but not everyone is marked. To determine the size, measure the diameter and pitch of the chain, then compare the results to the chart to see what size you need.
Heavy-duty roller chains are available with heat-treated pins, side plates, and rollers. In addition to being heat treated, they are also factory pre-stretched, which reduces wear on these parts. If properly maintained, they can last for years, reducing the risk of failure or corrosion. Depending on the application, standard roller chains are available in different sizes. It can be purchased separately. There are several options to choose from, depending on the size and strength of the application.
PEER roller chains contain solid rollers to reduce shock loads on the sprocket teeth. Heat treating and preloading all components of the PEER chain helps minimize initial elongation. Hot-dip lubrication ensures complete lubrication of all chain components, extending their life and reducing maintenance costs. For heavy-duty applications, ASME/ANSI-B29.1 chain is a good choice.
Standard roller chains are made of steel or alloy steel. However, it can be made of other materials such as stainless steel. In addition to steel, stainless steel is often used in food processing machinery where chain lubrication is an issue. Brass and nylon are also sometimes used. However, they are not that popular. Therefore, you should always check with your supplier before purchasing. By comparing the tensile strength of two different chains and making an informed decision, you can get the best price and service.
Chain without bushing
Bushless roller chains have advantages over conventional roller chains. Unlike conventional chains, bushless chains have extensive lateral flexibility, which increases the chain's lubrication flow. The inner plates of bushless chains have protruding shoulders so the oil can flow through them more easily and efficiently. This is an important characteristic of a smooth-running chain. Additionally, bushless chains may have improved shifting performance.
The strength of a bushingless roller chain is measured in terms of tensile strength and fatigue strength. The former measures the load a chain can withstand before breaking. Fatigue strength is equally important, and factors that affect fatigue strength include the steel used to make the chain components, the pitch hole fabrication, the type of shot peening on the chain, and the design and thickness of the chain. For example, if the chain is too thin, it may not be enough for heavy-duty applications.
Like traditional roller chains, bushingless roller chains have two different types of links. The inner link has two inner plates connected by pins, while the outer chain has two outer plates held together by bushings. A bushingless roller chain is similar to a traditional chain, except it eliminates a step in the assembly process by stamping the tube into the inner plate. So if you want a smoother ride, a bushingless roller chain is a better choice.
There are two different sizes of bushingless roller chains. One size is designed for use with standard single-strand chains, while the other size is designed for use with double-strand or triple-strand chains. Bushless chains are generally shorter than conventional chains, so they can fit in tighter spaces. Bushless chains are made of the highest quality materials. These chain attachments are case hardened for optimum strength and durability.
Mute chain
The silent roller chain has a smooth, low-noise drive. They are made of stacked rows of flat chainplates with a gear-like profile that meshes with the sprocket teeth. Each chainplate is attached to a corresponding sprocket, which also allows the chain to bend. While these basic components are the same for every silent roller chain, there are many variations that allow them to be used in a variety of applications.
The most popular high-speed transmission, silent chains feature gear-like sprockets. They can be made from single or multiple strands of material. Single-strand chains are less expensive than multi-strand chains, but they tend to wear out faster if not lubricated. Single-strand roller chains can be used for years without lubrication, but for your application, wide silent chains are still worth considering.
The design and construction of silent chains make them ideal for conveying a wide variety of products. They have flat, heat-resistant surfaces. They are also durable and non-slip. They are available in a variety of pitch sizes, widths, and mounting styles. Whether you need chains for general purpose conveyors or glass bottle transport applications, we have you covered. Ask about the benefits of silent roller chain conveyors.
Inverted tooth chains are another option for quieter chains. These chains are designed to reduce noise from engine-related friction. Silent chains are more common, and manufacturers have fallen in love with them. A silent chain consists of several links connected to the sprocket teeth. Teeth rotate to reduce noise, vibration, and chord action. These are the main reasons why silent chains are so popular.
ANSI chain pitch
To measure your bike's chain pitch, you can use a caliper. This measurement is taken from the center of the rolling pin to the center of the next rolling pin. Chains come in many sizes, but ANSI is the most common chain standard in the United States. A caliper is handy if you're not sure which size to buy, as it allows you to check for worn sprockets.
Chains that meet ANSI standards will be characterized by a certain pitch. This measurement is based on the width and spacing of the roll. The spacing is usually greater than the width. The standard number will be the right number for the width of the chain or the left number for the rollers. The number on the left indicates whether the chain is lightweight or heavyweight. Heavyweight chains are designated by the suffix "H".
Common chain sizes are based on ANSI chain pitch. Pitch is the minimum distance between bushing and sprocket. The smaller the chain pitch, the greater the total distance between the two points. This means the chain will last longer. However, if you are buying a chain for a specific application, you should check the pitch carefully as it can affect the performance of the chain.
Roller chain wear measurement
The purpose of roller chain wear measurement is to prevent breakage by monitoring the strain on the chain. There are several ways to measure roller chain wear. The first is to remove the chain from its working position and measure the distance from the sprocket to its measuring end. Another way is to measure the pitch of the chain or the distance between two pins. This method is superior to other methods because it is convenient and accurate.
When measuring the wear of a roller chain, it is important to note that the elements of the chain will gradually deform. About 3.75% of the total wear will be on the pins and the rest will be on the internal links. These wear measurements will vary based on the nominal pitch of the chain and the amount of friction the chain is experiencing. Proper lubrication between pins and bushings, load and frequency of articulation all affect wear rates.
It is important to measure the amount of wear on the roller chain to avoid excessive machine failures. The longer the chain runs, the more wear it will wear. Although the length of the chain should be less than the center distance, the excessive load will cause premature wear. Therefore, lubrication is essential. Additionally, the sag of the chain should not exceed 2% to 4% of its center-to-center distance. Finally, check for unusual noise or visible defects. A common cause of excessive roller chain wear is the size of the load. Every chain manufacturer sets a maximum workload for its product.
There are several ways to measure roller chain wear. If using a high-speed drive, it should have at least 11 teeth, and a medium-speed drive should have at least 25 teeth. Also, be sure to check the length of the chain, even if you should. The same goes for the pin diameter, which should be the same or different pitch as the roller chain.
editor by CX 2023-04-20
China 304 Stainless Steel Customized Chains Table Top Conveyor Chain with ISO Approved bush conveyor chain
Product Description
| Model | P | T | t | h | H | b | d |
| S16 | 100 | 30 | fifteen | 27 | 8 | sixteen | 14 |
| P102-W385 | 102 | 30 | 13 | 27 | 9 | 14 | fourteen |
| RUS270 | 123 | fifty | 24 | 46 | sixteen | 25 | 20 twenty.5 |
| Z20 | 125 | fifty | 24 | 48 | 15 | 26 | 20 |
| P140 | a hundred and forty | seventy eight | 31 | fifty | 19 | 32 | twenty five |
| Z30 | 142 | sixty four | 28.five | fifty | 18 | thirty.five | twenty five |
| one hundred fifty | 150 | 38 | 18 | forty | ten | 20 | 18 |
| P155 | a hundred and fifty five | 79 | 39.five | sixty three.5 | 36 | 40.5 | 30 |
| Z25 | a hundred and sixty | fifty eight | 28 | fifty five | 18 | 30 | 25 |
| YD310 | two hundred | 43 | twenty | 47 | twelve | 22 | twenty |
| A-3634 | 216 | sixty four | 26 | 72 | 20 | 28.five | 35 |
| X63 | 250 | sixty | 28 | 70 | 20 | thirty | 25 |
| P260 | 260 | 72 | 32 | seventy five | twenty | 34 | 32 |
ZheJiang CZPT Precision Casting and Forging Inc. was established in 2003, masking an spot of 40,000 square meter with 300 workers. In 2571, the company handed the good quality management technique certification of GB/T 19001-2016 and ISO 9001:2015, and has a quantity of invention patents.It is a nationwide substantial-tech organization.
Our main items are bucket teeth,side enamel,bucket adapter for excavator and loader Solid pipe coupling for concrete pump Drop forged chain for scraper conveyor, and so forth. Other casting and forging areas canalsobecustomized accordingto customer drawings. The main supplies are alloy metal, large manganese metal, grey iron, ductile iron, and many others.
Our company can generate casting variety in .1kg-2tons, forging selection in .1kg-100kgs, casting and forging yearly potential of ten,000tons.From productdesign, mould improvement to heattreatment, machining and spraying, we offer the whole processof inside production to better control the expense and good quality.
ZheJiang In addition Import and Export Trading Co., Ltd. was proven in 2571, is Wanxin's subsidiary, mostly responsible for marketing and advertising and export.
FAQ
Q1.Are you a maker or a trading firm?
we are totally company of machinery areas.
Q2.Can i get samples for examining the top quality?
we can supply totally free samples,but you need to have to pay the freight.
Q3.What is actually your MOQ?
For standard prodcuts,we do not have MOQ.
For customerized products,we will inform you MOQ based mostly on your drawing.
This autumn.What's your shipping and delivery time?
it really is about 7-forty five times based mostly on your quantity.
Q5.What is your payment phrases?
SumAmount≥5000USD,T/T 30% as deposit,balance ahead of shipping.
|
US $5 / Piece | |
100 Pieces (Min. Order) |
###
| Material: | Alloy |
|---|---|
| Structure: | Forging Chain |
| Surface Treatment: | Polishing |
| Chain Size: | 142 |
| Feature: | Heat Resistant |
| Process: | Forging |
###
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| MODEL | P | T | t | h | H | b | d |
| S16 | 100 | 30 | 15 | 27 | 8 | 16 | 14 |
| P102-W385 | 102 | 30 | 13 | 27 | 9 | 14 | 14 |
| RUS270 | 123 | 50 | 24 | 46 | 16 | 25 | 20 20.5 |
| Z20 | 125 | 50 | 24 | 48 | 15 | 26 | 20 |
| P140 | 140 | 78 | 31 | 50 | 19 | 32 | 25 |
| Z30 | 142 | 64 | 28.5 | 50 | 18 | 30.5 | 25 |
| 150 | 150 | 38 | 18 | 40 | 10 | 20 | 18 |
| P155 | 155 | 79 | 39.5 | 63.5 | 36 | 40.5 | 30 |
| Z25 | 160 | 58 | 28 | 55 | 18 | 30 | 25 |
| YD310 | 200 | 43 | 20 | 47 | 12 | 22 | 20 |
| A-3634 | 216 | 64 | 26 | 72 | 20 | 28.5 | 35 |
| X63 | 250 | 60 | 28 | 70 | 20 | 30 | 25 |
| P260 | 260 | 72 | 32 | 75 | 20 | 34 | 32 |
|
US $5 / Piece | |
100 Pieces (Min. Order) |
###
| Material: | Alloy |
|---|---|
| Structure: | Forging Chain |
| Surface Treatment: | Polishing |
| Chain Size: | 142 |
| Feature: | Heat Resistant |
| Process: | Forging |
###
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| MODEL | P | T | t | h | H | b | d |
| S16 | 100 | 30 | 15 | 27 | 8 | 16 | 14 |
| P102-W385 | 102 | 30 | 13 | 27 | 9 | 14 | 14 |
| RUS270 | 123 | 50 | 24 | 46 | 16 | 25 | 20 20.5 |
| Z20 | 125 | 50 | 24 | 48 | 15 | 26 | 20 |
| P140 | 140 | 78 | 31 | 50 | 19 | 32 | 25 |
| Z30 | 142 | 64 | 28.5 | 50 | 18 | 30.5 | 25 |
| 150 | 150 | 38 | 18 | 40 | 10 | 20 | 18 |
| P155 | 155 | 79 | 39.5 | 63.5 | 36 | 40.5 | 30 |
| Z25 | 160 | 58 | 28 | 55 | 18 | 30 | 25 |
| YD310 | 200 | 43 | 20 | 47 | 12 | 22 | 20 |
| A-3634 | 216 | 64 | 26 | 72 | 20 | 28.5 | 35 |
| X63 | 250 | 60 | 28 | 70 | 20 | 30 | 25 |
| P260 | 260 | 72 | 32 | 75 | 20 | 34 | 32 |
Types of Roller Chains
There are several types of roller chains available. These chains have different properties and serve different purposes. Here you will learn about diamond roller chains, X-ring and O-ring chains, inverted tooth chains, and self-lubricating chains. You can choose the type that best suits your needs by reading this article. It will also help you make an informed decision. Buying the right roller chain for your needs is easy. Hope this article is helpful to you!
Diamond roller chain
Diamond roller chains are more efficient than other chains and can significantly extend chain life. The superior design of the chain prevents internal rust from seeping out. Additionally, Diamond ACE features a corrosion-resistant exterior and a zinc-nickel pre-assembled coating that provides extended corrosion protection and wear resistance. These features reduce chain downtime and labor costs, saving a building materials manufacturing company nearly $33,000 over the life of its machines.
Diamond series chains lead the industry in quality and durability, with industry-leading tensile strength and the lowest total cost of ownership. With a diverse product portfolio including standard chains, specialty chains, and custom chains, the company is sure to provide the right chain for your application. The company also offers a wide range of accessories for a variety of machinery. For more information, please visit the company website.
As one of the leading manufacturers of roller chains, the CZPT Company offers unparalleled expertise and wear resistance in the power transmission market. CZPT is trusted by leading industries and provides the highest return on investment. The diamond is a symbol of strength and durability, and the company chose it as the company's trademark to convey its core values. CZPTs can last up to 100 years or more in harsh conditions, even in underwater environments.
Self-lubricating chain
Self-lubricating roller chains are designed to increase performance while maintaining a high level of cleanliness. These chains are made of sintered alloy bushings impregnated with lubricant and pins specially treated to release oil when necessary. These chains have a long service life and are suitable for environments where regular lubrication is difficult. Below are the benefits of self-lubricating roller chains.
Maintenance-free self-lubricating roller chains are the perfect replacement for standard roller chains. They are suitable for packaging, printing, textile, and sawmill applications. These chains reduce downtime and increase productivity. Furthermore, they reduce the risk of contamination. Another advantage is that there are many types of self-lubricating roller chains to choose from, allowing you to choose the one that best suits your needs. To learn more about these benefits, read the Maintenance Free Roller Chains Market Report published by Dataintelo.
CAN-AM self-lubricating roller chains ensure stick-free operation. These chains are available in ANSI/BS standard and double pitch variants. They feature oil-impregnated bushings and preloaded sintered steel bushings for long life. These self-lubricating roller chains are drop-in replacements for standard roller chains and run on standard roller chain sprockets.
X-Ring and O-Ring Chains
Both O-ring and X-ring roller chains are sealed and unsealed. You'll find them on vintage bikes and small economy cars. Other applications include bulldozer treads and conveyor belts. Standard chains are made of simple plain bearings that require lubrication every few hundred miles. While the former is the most affordable type of roller chain, they do require more maintenance than O-rings.
The main difference between the two types of chains is the friction and cost they generate. X-rings are slightly less expensive, but they create less friction than O-rings. X-rings are a more affordable option for road riders, while O-ring chains are more expensive for off-road racers. In some cases, X-ring and O-ring roller chains can be distinguished by the price tag alone.
Both X-ring and O-ring roller sprockets are available in a variety of styles. The two styles offer comparable performance, but there are some key differences to consider. X-rings are generally better for longer travel as they offer greater durability and performance. O-rings are usually more expensive than X-ring chains, but if you're thinking about long trips, they're a great option.
Reverse chain
Inverted roller chains are often referred to as silent chains. They have two protrusions on each board. The outer surface is ground to include an angle of sixty or seventy degrees. These protrusions about the working surfaces of the sprocket teeth. The inner surface or shape of the sprocket can clear the sprocket. This produces a silent but still valid chain. This type of chain is used in transmissions to move heavy objects.
There are three basic types of inverted toothed roller chains. Simple chains are single chains, while double and triple chains have two or three strands. In these types of chains, the pins pass through-hardened steel bushings at the ends of the links. The main difference between these types is their size. If you are not sure what size you need, first calculate the capacity of the chain. You might be surprised to learn that the smaller the diameter the better.
The number of links in a reverse roller chain determines the frequency of vibration. The frequency depends on the size of the chain and the length of the chain between the sprockets. The shorter the chain, the bigger the "pull" - the up-and-down jitter caused by the sprocket. This causes additional peak loads on the drive and shortens its life.
PEER Chain's Heavy Duty Series Double-Stranded Roller Chains
Heavy-duty double-strand roller chains are ideal for industrial and agricultural use as they provide extra stability and strength. PEER Chains manufactures chains in various lengths and pitches and offers different accessories including sprockets and pre tensioned chains. These chains are also available in a variety of different alloys and grades. Listed below are some of the most common uses for heavy-duty double strand roller chains.
Heavy-duty PEER double-strand roller chains are available in a variety of styles and types, including the HKK NICKEL PLATED series. These chains are best suited for outdoor and mildly corrosive applications. They use a patented process to increase fatigue strength and reduce initial elongation. In addition, HKK double pitch twin-strand roller chains are lighter and less expensive than standard roller chains.
The report also highlights the competitive environment and the latest market trends. The report identifies key players in the Roller Chains industry, including manufacturing, sales, and global market share. It also provides detailed company profiles and analyses of each vendor, including recent product launches, partnerships, and mergers and acquisitions. It also provides the competitive landscape, including company profiles, product mix, and production scale. Once you know what to expect from the market, you can make a buying decision.
Maintenance of Mechanical Flexible Couplings
Proper maintenance of mechanical flexible couplings on roller chains is critical to ensuring the proper operation and reliability of the system. Maintenance of these couplings includes periodic inspection of the components. Check for signs of fatigue and wear. Regular inspections will help determine when to replace the coupling. It also helps determine the remaining life of the coupling.
Couplings should be replaced periodically for optimum performance. When replacing, be sure to use the correct parts. Make sure the coupling type matches the coupling type and chain size. Identical coupling parts may not fit, so a cross-reference guide or manufacturer's spec number may be helpful. Make sure that the coupling is fitted with a suitable roller chain.
Mechanical elastic couplings on the roller chain can be easily lubricated to avoid premature failure. Elastomeric couplings can accommodate minor shaft misalignments and are suitable for high rotational speeds. Also, it absorbs shocks. Its flexibility is due to loose components. Additionally, lubrication is essential to reduce wear on coupling components.
Roller chain size
Knowing the basic dimensions of the rollers is essential if you need to find the right roller chain for your needs. The three key dimensions of a roller chain are pitch, width, and pin diameter. These dimensions are important because they are used to identify the type of chain. These dimensions do not normally appear in chain manufacturer catalogs. They are usually designed for people designing new equipment. They are not important to maintenance technicians, but they are important to know if you are looking for a specific type of roller chain.
Once you know the exact size of the chain, you can move on to choosing the correct type. You can use the printable template to measure your chain, which makes it easy to compare with the size chart. Don't forget to check the rest of the roller chain's specs to make sure it fits your machine. Using the Roller Chain Size Chart is an easy way to determine the proper length, width, and height for your application.
When buying a roller chain, be sure to check the number of teeth and the ratio of the two. A common ratio is 2:1. The drive sprocket must have at least twice as many teeth as the roller sprocket. If the chain is used for high precision, check the type of sprocket as this will determine the correct size of the chain. You can also choose between slip-fit and press-fit mid plates.
editor by czh 2022-12-30